WOKAITE 0.5-20ton HSZ-V chain hoist block
Compact and light
Our best and strongest designed,all-steel manual chain hoist block.
Bearing mechanism to increase mechanical effciency.
Special Hooks
Drop-forged top and bottom hooks are specially designed for slow
Bending to warn excessive overload.
Rust protection
Durable powder coat paint.
Safety brake
Asbestos-free brake discs.
Load chain sprocket made of alloy steel with precision machining and heat treatment.
Double pawts
Double pawt with springs provide redundancy for reliable operation
of brake mechanism according CE-regulations.
HSZ-V Series chain pully block Specifications
[table id=47 /]
Please feel free to contact us, your inquiry will be replied within 24 hours.
Related SEO Article – Maintenance method of manual chain hoist block
1.After use the manual chain hoist block should be cleaned and coated with antirust grease, stored in a dry place to prevent the manual hoist damp rust and corrosion.
2.Maintenance and repair should be operated by professional staff, cleaning manual hoist chain pulley block parts with kerosene, add butter lubrication in gears and bearings.
3.Chain pully block after cleaning and maintenance, should be carried out in the no-load test, to confirm the normal operation, can be delivered to use only if the brake is reliable.
4.The friction surface of the brake must be kept clean. Brake parts should be checked regularly to prevent the brake failure and the occurrence of heavy load from falling.
5.The chain pully block lifting sprocket around bearing roller, the grease can be adhered to the bearing inner ring which is pressed on the neck of the lifting chain wheel shaft, then the bearing outer ring into the wall.
6.When in the installation of the brake part of the manual hoist chain pulley block, pay attention to the tooth groove of the ratchet wheels and ratchet pawl meshed well or not, spring on the pawl control should be flexible and reliable.Fitted on the bracelet wheel, clockwise rotate the bracelet wheel, press the ratchet wheel and friction plate on the brake seat, counter clockwise rotate the bracelet wheel, the ratchet and the friction plate should be left a gap.
7.In order to facilitate the maintenance and disassembly, one of the chain link bracelet (welding is not allowed).
8.In the process of filling and using chain pully block, the friction surface of the brake device must be kept clean, and the braking performance is always checked to prevent the weight from falling due to the failure of the brake.